Application of transfer mark

How to use DTF transfer marks, also called ironing marks.

Direct to film - transfer label is for use on clothes/textiles in all kinds of colors in cotton, polyester and other materials.

This is not vinyl, but a print that you press onto the garment. You will feel that it is on the garment, but it feels soft. It has good stretch and is well suited for stretchy clothes, but can also be used on other textiles.

It can be fixed with an iron and good pressure, or preferably a heat press.

​Your own prints can be ordered from us, whether it is a logo for a company, sports team, Russian uniform or for private use on, for example, ready-made or home-made clothes.

How to apply with heat press:

  • Preheat the garment for 15 seconds to remove excess moisture. Allow the garment to cool before applying the transfer label.
  • Place the label on the garment - white back side down, image facing up/plastic carrier up.
  • Press at approx. 150 ci for 10-15 seconds with good pressure.
  • Take the garment out of the press and remove the plastic carrier when it has cooled a little. If the plastic does not come off, press a little more before removing it and wait until it is cold.
  • Cover the print with baking paper or Teflon sheet and press again for 10 seconds.

If you use the Cricut Easypress or a regular iron, press each part well at about 1 dot/150 C and about 10 seconds. Good pressure is important!

Washing instructions: Wash inside out, at up to 40 celcius, without fabric softener and bleaching agents. Tumble dryer is not recommended.

Order